PSA nitrogen · Made in India for Egypt

PSA nitrogen generator supplier for Cairo, Alexandria and Egypt

Gastek has built gas generation plants in India since 1993. Its PSA nitrogen generators reach Egyptian sites through Alexandria and Port Said, at 95–99.999% purity and up to 5,000 Nm³/h, with export documents and commissioning support.

Egypt site sheetPSA nitrogen
Ambient
High summer ambient; design value set per site
Intake air
Heat and dust: inlet filtration and compressor cooling sized for the site
Humidity
Mediterranean coast and Suez Canal zone: dryer duty and condensate drains sized for humid air
Installation
Skid in a ventilated utility room, a shaded skid, or a container-ready layout
Ports
Alexandria, Port Said, Damietta, Ain Sokhna
Documents
Invoice, packing list, certificate of origin, bill of lading, datasheets
Electrical
Electrical requirements are reviewed during sizing and quotation.

How a nitrogen plant travels from India to an Egyptian site

Road · sea · road

  1. Greater Noida works

    Engineering, assembly, testing and export packing.

    By road

  2. Mundra or Nhava Sheva

    Export clearance and loading at a west-coast port.

    Sea freight

  3. Alexandria or Port Said

    Import clearance by the consignee or their agent; Damietta and Ain Sokhna also possible.

    By road

  4. Your site

    Placement, hook-up and commissioning with Gastek's engineers, on site or remotely.

Exported

Nitrogen plants Gastek has exported

The plants nearest an Egyptian buyer's question, including plants already running in Egypt. More plants Gastek has supplied are on the Projects page.

  • 1,100Nm³/h

    Polyester chip makers

    PSA nitrogen plants in Egypt, Turkey and Thailand

  • 610Nm³/h

    Refinery project, Malta

    CE-certified nitrogen package

  • 15+

    Export markets

    Plants shipped from the Greater Noida works

Since 1993D-U-N-S 91-686-7372ISO 9001:2015

All plants Gastek has supplied

Site conditions

Egypt site conditions a nitrogen plant is sized for

Summer heat, dust and humid air on the Mediterranean coast and in the Suez Canal zone change the air side of a PSA plant more than the adsorbers. The numbers mark where.

Drawing: PSA nitrogen generator with twin adsorber vessels, air receiver and nitrogen buffer tank, built by Gastek
Drawn from a photograph of a Gastek plant. Tap a number for what changes in Egypt.

Regions

Ports and industrial zones Gastek ships to in Egypt

Each project is planned around the port route and the site's industrial city or zone.

RegionPortIndustrial zonesTypical nitrogen demand
Cairo Industrial CitiesRoute set per site10th of Ramadan, 6th of October, Badr, Obour
  • Food
  • Pharma
  • Packaging
  • Manufacturing
Alexandria and Borg El ArabAlexandria PortBorg El Arab, coastal industry
  • Chemicals
  • Food
  • Pharma
  • Logistics
Suez and Ain SokhnaAin SokhnaSuez Canal zone, refinery-linked sites
  • Petrochemical
  • Refinery
  • Utilities
  • Export plants
Port Said and DamiettaPort Said, DamiettaDelta industrial routes
  • Food processing
  • Packaging

Applications

Nitrogen generators for Egyptian industries

Flow, purity, compressor scope, dew point, outlet pressure and operating hours are matched to the process, not the industry label.

  • Food and beverage

    Modified atmosphere packaging, edible oils, beverages, dry goods, snacks and shelf-life protection.

    Food and beverage nitrogen
  • Pharma and API

    API handling, packaging, storage blanketing, vial purging and oxygen- or moisture-sensitive processes.

    Pharma nitrogen
  • Chemical processing

    Tank blanketing, reactor inerting, solvent handling, resins, polymers and chemical processing.

    Chemical processing nitrogen
  • Petrochemical and refinery

    Reactors, storage tanks, catalyst handling, refinery units, polymers and process inerting.

    Petrochemical and refinery nitrogen
  • Steel and metal processing

    Steel, heat-treatment support, galvanising, laser cutting, fabrication and industrial atmosphere control.

    Steel and metal nitrogen
  • CMS replacement

    CarboTech CMS for PSA nitrogen plants in Egypt where purity has dropped, flow is unstable or a changeout is due.

    CMS in Egypt

Enquiry to start-up

From enquiry to start-up at an Egyptian site

Built for plant, procurement and project teams who need a clear supplier quotation before approval or a purchase order.

  1. 01

    Requirement review

    Flow, purity, outlet pressure, application, operating hours, Egyptian site location, utilities and site constraints are checked before sizing.

  2. 02

    Engineering and quotation

    The PSA package, compressor and air treatment, tanks, analyser, CMS, controls, layout and commercial scope are defined.

  3. 03

    Manufacture and testing

    Built at the Greater Noida works, assembled, tested and prepared for inspection and export packing.

  4. 04

    Export documents

    Commercial invoice, packing list, certificate of origin, bill of lading support, datasheets and drawings.

  5. 05

    Shipping to Egypt

    Sea freight to Alexandria, Port Said, Damietta or Ain Sokhna, chosen by site and consignee.

  6. 06

    Start-up

    Commissioning, operator guidance, analyser verification, maintenance planning and spares, timed to site readiness.

Egypt buyer questions

Egypt nitrogen generator questions

Can Gastek supply a PSA nitrogen generator to Egypt?

Yes. Gastek manufactures PSA nitrogen generators in India and supports Egyptian buyers with sizing, the quotation, export documents, shipping, commissioning and spares.

Which Egyptian ports and locations does Gastek serve?

Sea freight can be planned to Alexandria, Port Said, Damietta or Ain Sokhna. Sites include Cairo, Alexandria, Suez, Port Said, Damietta, 10th of Ramadan City, 6th of October City and Borg El Arab, with the delivery route set per site.

What does a nitrogen generator cost in Egypt?

The price follows the duty: flow, purity, delivery pressure, and whether the compressor and dryer are part of the supply. For an Egyptian project it also depends on the delivery terms, ex-works, FOB or delivered to Alexandria or Port Said, and on the import duty and VAT paid in Egypt. Send the duty and Gastek quotes a configured plant with its running cost and payback against cylinders.

How long does it take from order to start-up?

Manufacture and testing come first, then sea freight, then clearance, installation and commissioning. Gastek confirms the schedule with the quotation, because it depends on the size and scope of the plant.

Is the plant suitable for Egyptian power and summer heat?

Yes, when it is sized for the site. Electrical supply, ambient temperature, compressor cooling, dryer duty, ventilation and operating hours are reviewed during sizing and quotation.

What information is needed for a quotation?

Nitrogen flow, purity or residual oxygen, outlet pressure, application, operating hours, the Egyptian site location, utilities, installation type and any document requirements.

Can Gastek replace the CMS in an existing Egyptian nitrogen plant?

Yes. With the vessel size, the CMS grade in use, flow, purity, pressure and the symptoms you see, Gastek can quote CarboTech CMS and plan the changeout.

Egypt quotation

Send the Egypt requirement. Gastek sizes the plant around it.

Flow, purity, pressure, operating hours, application and the Egyptian site location are enough to start. Gastek replies with a configured plant and the shipping route.

Gastek contact hoursMon–Sat, 9:00 am–6:00 pm IST

  • Flow rate
  • Purity or O₂ ppm
  • Outlet pressure
  • Application
  • Region and site