Membrane nitrogen · Made in India for the UAE
Membrane nitrogen generator supplier for Dubai, Abu Dhabi and the UAE
Gastek has built gas generation plants in India since 1993. Its membrane nitrogen generators make 95–99.5% nitrogen from compressed air, reach UAE sites through Jebel Ali and Khalifa Port, and are sized for summer heat and desert dust, with export documents and commissioning support.
- Purity
- 95–99.5% nitrogen, dry; above 99.5%, PSA
- Capacity
- 1–5,000 Nm³/hr, modules in parallel
- Ambient
- Summer heat: modules sized for the hottest feed air the site sees
- Intake air
- Dust and sand: inlet filtration ahead of the compressor sized for it
- Humidity
- Humid coastal air: compressor condensate drained before the modules
- Installation
- Skid in a ventilated utility room, under shade, or container-ready
- Ports
- Jebel Ali, Khalifa Port, Sharjah, Fujairah
- Documents
- Invoice, packing list, certificate of origin, bill of lading, datasheets
- Electrical
- Electrical requirements are reviewed during sizing and quotation.
How a membrane nitrogen generator travels from India to a UAE site
Road · sea · road
Greater Noida works
Engineering, assembly, testing and export packing.
By road
Mundra or Nhava Sheva
Export clearance and loading at a west-coast port.
About a week at sea
Jebel Ali or Khalifa Port
Import clearance by the consignee or their agent; Sharjah and Fujairah also possible.
By road
Your site
Placement, hook-up and commissioning with Gastek's engineers, on site or remotely.
Exported
Nitrogen plants Gastek has exported
Membrane and PSA systems ship from the same Greater Noida works. These PSA plants are already running abroad; more are on the Projects page.
610Nm³/hr
Refinery project, Malta
CE-certified nitrogen package
1,100Nm³/hr
Polyester chip makers
PSA nitrogen plants in Egypt, Turkey and Thailand
15+
Export markets
Plants shipped from the Greater Noida works
Since 1993D-U-N-S 91-686-7372ISO 9001:2015
All plants Gastek has suppliedSite conditions
UAE heat and dust, and where a membrane system meets them
A membrane's output shifts with the temperature of its feed air, and dust and oil are what wear the fibres. The numbers mark where the UAE changes the package.
Emirates
Membrane nitrogen generators in Dubai, Abu Dhabi and across the emirates
Each project is planned around the nearest port and the site's free zone, industrial area or quay.
| Emirate | Port | Free zones and industrial areas | Typical membrane duties |
|---|---|---|---|
| Dubai and Jebel Ali | Jebel Ali Port | JAFZA, Dubai Industrial City, Dubai Maritime City |
|
| Abu Dhabi | Khalifa Port | KIZAD, ICAD, Mussafah |
|
| Sharjah and Ajman | Sharjah ports | Hamriyah Free Zone, Ajman industrial areas |
|
| Fujairah and the north | Fujairah | Fujairah, Ras Al Khaimah, Umm Al Quwain |
|
Applications
Membrane nitrogen for UAE industries
Membrane fits where 95–99.5% holds the oxygen limit. Purity, flow, pressure and the air supply are matched to the duty, not the industry label.
Marine and offshore
Inerting and purging on tankers, offshore units and in ship repair yards, where a compact skid with no adsorbent beds suits deck space and motion.
Membrane nitrogen for marineOil, gas and tank storage
Tank blanketing, line purging and inerting at terminals and storage sites from Fujairah to Ruwais.
Oil and gas nitrogenFood packaging
Flushing packs of dates, snacks, dairy powders and coffee, and blanketing edible oils and juices, where 97–99.5% nitrogen holds the oxygen limit.
Food and beverage nitrogenChemical tank blanketing
Solvent and storage tanks in KIZAD, ICAD and Hamriyah, blanketed and purged to each vessel's oxygen limit.
Chemical plant nitrogenTyre, aviation and fire prevention
Dry nitrogen for tyre inflation in fleet and aviation service, and oxygen-reduction systems for archives and stores.
Membrane generator detailsHigher purity: PSA
Laser cutting, SMT soldering and pharma usually need more than 99.5%. Gastek supplies PSA nitrogen generators to the UAE for those duties.
PSA nitrogen in the UAE
Enquiry to start-up
From enquiry to start-up at a UAE site
Built for plant, procurement and project teams who need a clear supplier quotation before approval or a purchase order.
01
Requirement review
Flow, purity, outlet pressure, application, operating hours, emirate, the compressed air available and the hottest site temperature are checked before sizing.
02
Engineering and quotation
Membrane modules, filtration, compressor scope, receiver, controls and layout are defined, with the air flow the system needs at your purity.
03
Manufacture and testing
Built at the Greater Noida works, assembled, tested and prepared for inspection and export packing.
04
Export documents
Commercial invoice, packing list, certificate of origin, bill of lading support, datasheets and drawings.
05
Shipping to the UAE
Sea freight to Jebel Ali, Khalifa Port, Sharjah or Fujairah, chosen by site and consignee.
06
Start-up
Commissioning, purity check, operator guidance, filter-change planning and spares, timed to site readiness.
UAE buyer questions
UAE membrane nitrogen generator questions
Can Gastek supply a membrane nitrogen generator to Dubai and the UAE?
Yes. Gastek builds membrane nitrogen generators in India and supports buyers in Dubai, Abu Dhabi, Sharjah and the northern emirates with sizing, the quotation, export documents, shipping to Jebel Ali or Khalifa Port, commissioning and spares.
Does UAE heat affect a membrane nitrogen generator?
Yes, and the design allows for it. A membrane's nitrogen output and purity change with the temperature of its feed air, and UAE summers push that temperature up. Gastek sizes the modules for the hottest air the compressor will deliver on site, and places the skid in a ventilated room or under shade.
Can a membrane nitrogen generator be used on ships and offshore in the UAE?
Yes. Membrane systems suit tanker inerting, line purging and blanketing on vessels, offshore units and in ship repair yards, because they are compact and have no adsorbent beds. Purity, materials, the vessel's rules and any class approval it needs are agreed at enquiry.
Membrane or PSA nitrogen for a UAE site?
Membrane suits 95–99.5% duties where a compact skid that starts with the air matters: food packaging, tank blanketing, marine and tyre service. PSA suits higher purity, up to 99.999%, and large continuous flows such as laser cutting, electronics and pharma. Gastek supplies both to the UAE and quotes the one that fits the duty.
Does Gastek supply nitrogen receivers in the UAE?
Yes. Gastek makes pressure vessels as well as gas plants, and every membrane or PSA package can include its air and nitrogen receivers, sized to the system's peaks. Standalone receivers can be quoted with the vessel volume, pressure and design code.
Which ports and emirates does Gastek ship to?
Systems ship to Jebel Ali for Dubai and the northern free zones, to Khalifa Port for Abu Dhabi, KIZAD and ICAD, and to Sharjah or Fujairah where the site is closer. Sites in every emirate can be served.
What does a membrane nitrogen generator cost in the UAE?
The price follows the duty: nitrogen flow, purity, pressure, the compressed air supply and filtration. For a UAE project it also depends on the delivery terms, ex-works, FOB or delivered to Jebel Ali, and on the import duty and VAT paid at the UAE end. Send the duty and Gastek quotes a configured system with its running cost.
Can it run on our existing compressor?
Possibly. The compressor needs enough spare flow and pressure at the required air quality, on the hottest day, after its other users are served. Gastek reviews the air supply when sizing, and adds filtration or a dedicated compressor where the existing one falls short.
How long does it take from order to start-up?
Manufacture and testing come first, then about a week at sea, then clearance, installation and commissioning. Gastek confirms the schedule with the quotation, because it depends on the size and scope of the system.
UAE quotation
Send the UAE requirement. Gastek sizes the system around it.
Flow, purity, pressure, the air you have and the emirate are enough to start. Gastek replies with a configured membrane system, the air it needs, and the shipping route.
Gastek contact hoursMon–Sat, 9:00 am–6:00 pm IST
- Nitrogen flow, and the peak
- Purity, or the oxygen limit at the use point
- Outlet pressure and operating hours
- Your compressed air: spare flow, pressure and quality
- Emirate, site or vessel and the hottest ambient temperature